Chapter I

In order to strengthen supervision and management of special equipment operator work, standardize operations personnel certification examination procedures to protect the safe operation of special equipment, according to the "PRC Administrative Licensing Law," "Regulations on Safety Supervision of Special Equipment" and "State Necessary Reserved items requiring administrative approval of administrative licensing decision "to develop this approach.

Article boilers, pressure vessels (including cylinders), pressure pipes, elevators, cranes, passenger ropeway, large-scale amusement facilities, the field (plant) within the motor vehicle and other special operations personnel and their associated equipment management personnel referred to special equipment operating personnel. Special equipment operator job type and see the way the project directory annex.

Engaged in special operations personnel equipment should be in accordance with the provisions hereof, after passing an examination to obtain "special equipment operator certificate" before engaging in the appropriate job or management.

Article III of Quality Supervision, Inspection and Quarantine (hereinafter referred to as AQSIQ) is responsible for the national special equipment operator supervision and management of quality and technical supervision departments above the county is responsible for the area of the special equipment operator supervision and management.

Article application "special equipment operator Permit" shall be designated by the department to the issuing first special equipment operator examination bodies (hereinafter referred to examination bodies) register for the examination; After passing the examination, examination results and related materials with the hair certificate authority for audit, certification.

Article special equipment production, the use of units (hereinafter referred to as the employer) should be employed (employment) made with "special equipment operator certificate" of personnel engaged in work related to the management and operations, and operations personnel strict management.

Special equipment operator certificates shall, by chapter operations, found hidden timely disposal or reports.

Chapter II audit certification exams and procedures

Article VI special equipment operator certification examination work quality and technical supervision departments above the county level responsibility, the specific classification range by the provincial quality and technical supervision departments decided and announced within this province.

For a smaller number of pressure vessels and pressure piping with pressure seal chamber maintenance, long-distance pipeline safety management, operation and management of passenger ropeway, large-scale amusement facilities installation and management of operating personnel certification examination undertaken by the State Administration of Quality Administration to determine examination bodies, unified organization of the examination, by the device location quality and technology supervision department audit, certification.

Article VII of special equipment operator examination bodies should have the appropriate facilities, equipment, teachers, invigilators and a sound management system and other necessary examination conditions and capabilities, the issuing department approval undertake examinations.

Issuing department shall supervise the examination bodies, identify problems and timely treatment.

Article VIII special equipment operator certification examinations and audit procedures include: exam registration, examination, licensing application, acceptance, approval, certification.

Article IX examination bodies issuing department and office premises shall publish this approach, examination and audit certification procedures, test operations personnel category, apply specific conditions, charging basis and standards, organization name and place of examination, examination plan and other matters. Among them, the test application time, test subjects, test sites, test time and other specific examination program matters, it should be held the day of exam announced two months ago.

Should be conditional on websites, news media announced.

Article 10 An applicant "special equipment operator Permit" shall comply with the following conditions:

(A) the age of 18 years or more;

(Two) apply in good health and meet the job type on the special requirements of the body;

(Three) and apply for jobs species have adapted to the cultural level;

(Four) types are compatible with the application process work experience;

(Five) have the appropriate security technology knowledge and skills;

(Six) to meet safety and other technical specification requirements.

Operating personnel shall be in accordance with the specific conditions of the relevant safety technical specifications of the regulations.

Article XI employer shall strengthen safety education and training of operating personnel to ensure that special equipment operator with the necessary knowledge of the special equipment safety jobs, job skills, and timely updating of knowledge. No training capacity, may entrust the issuing sector organizations for training.

Operating personnel training content developed by AQSIQ related operations and other security personnel training and examination outline technical specifications execution.

Article XII qualifying examination bodies for personnel shall be submitted to the relevant documents, registration exam.

Article XIII examination bodies should develop and earnestly implement the special equipment operator examination rules and regulations of the Organization's work in strict accordance with open, fair and just principles, organization and implementation of special equipment operator exam, to ensure the quality of examinations.

Article XIV After the examination, the examination agency shall, within 20 working days to inform the applicant of examination results and publish test scores.

Article XV exam qualified personnel, with examination results notice and other relevant supporting documents, to the issuing department to apply for "special equipment operator certificate."

Article XVI issuing department shall, within 5 working days to review the submitted materials, or inform the applicant compensation for material and make a decision whether to accept it. Be able to spot the review, it shall apply the spot.

Article XVII agree to accept the application, the issuing authority shall, within 20 working days to complete the examination and approval procedures. Granted certification of the applicant within 10 working days issued a "special equipment operator certificate"; not issued, it shall give reasons in writing.

Article XVIII special equipment operator certification examination work follows convenience, open, efficient principle. For the convenience of applicants apply for certification examination matters, the issuing department can be accepted and the issuance of a certificate of registration sites located in exams and exam registration examination bodies entrusted whether the applicant eligibility of applicants for review, after passing the certification exam sector can directly apply for acceptance and verification procedures, certification matters.

Chapter III Certificate Use and Regulatory

Article XIX hold "special equipment operator Permit" must be approved by the employer's legal representative (responsible person) or its authorized person employed (employed) after use, before they can be permitted within the scope of the project work.

Article 20 The Employer shall strengthen the special equipment operating on-site management and operations personnel to fulfill the following obligations:

(A) develop procedures and related special equipment safety management system;

(Two) employing certified operating personnel, and the establishment of special equipment operator management files;

(Three) for the operating personnel safety education and training;

(Four) to ensure that certificates and Follow Instructions;

(Five) to provide the necessary conditions for safe operation;

(Six) other obligations.

Twenty-one special equipment operator shall comply with the following provisions:

(A) operations to carry documents, and consciously accept the employer's safety management and quality and technical supervision departments of supervision and inspection;

(Two) to actively participate in special equipment safety education and safety training;

(Three) strictly enforce the relevant safety procedures and special equipment regulations;

(Four) refuse illegal orders;

(Five) found potential accidents or unsafe shall immediately report to site management personnel and units of the responsible person reports;

(Six) other relevant regulations.

Twenty-two "special equipment operator certificate" review once every two years. Certified personnel shall expire three months to review prior to the issuing authority the application for review. Review of qualified, by the issuing authority in the signature on the original certificate. In two years, no violations, illegal and other bad records, and time to participate in safety training, technical specifications shall be in accordance with the relevant safety requirements to extend the review period.

Unqualified review should be re-exam. Fails to apply for a review or examination failed, the "special equipment operator certificate" will be canceled.

Regional practitioners of special equipment operator, local practitioners can apply for a review of the issuing department.

Twenty-three "special equipment operator certificate" is lost or damaged, the holder shall promptly report issuing authority and shall be published in the local media. Verified, re-submit the certificate by the issuing authorities.

Article 24 Any unit or individual may illegally printed, forged, altered, reselling, leasing or lending "special equipment operator certificate."

Article 25 The quality and technology supervision departments at all levels should work activities of special equipment supervision and inspection of illegally operating behavior.

Article 26 The issuing authority shall strengthen the supervision and management of examination bodies, and promptly correct violations, if necessary, should be sent to on-site supervision of examinations related activities.

Article 27 of the issuing authority to establish special equipment operator supervision and management files, records certification examination, review and oversight of the inspections. Certification, review and supervision and inspection on a regular basis to the public.

Article 28 The special equipment operator exam registration, examination, licensing application, acceptance, approval, certification and other aspects of the specific requirements and test establishment, "special equipment operator certificate" cancellation and review such matters, in accordance with AQSIQ developed special equipment operator safety assessment rules, technical specifications execution.

Chapter IV Penalties

Article 29 The applicant withholding relevant information or providing false materials application "special equipment operator certificate" shall not be accepted or not to approve certification and one years may not re-apply for "special equipment operator certificate."

Article 30 of the following circumstances, it shall revoke "special equipment operator certificate":

(A) permit workers to cheating in examinations or other fraudulent means to obtain "special equipment operator certificate";

(Two) certified workers caused by illegal operation or management of special equipment accidents;

(Three) certified workers find potential accidents or other factors of insecurity caused by special equipment not immediately report the accident;

(Four) certified operator fails to apply for a review or a reexamination not fail to take the exam;

(Five) exam certification agency or department staff abuse, negligence, breach of statutory procedures or certification examination beyond the scope of certification.

Violation of the preceding paragraph (a), (b), (c), (d) provides, the holder three years may not re-apply for "special equipment operator certificate"; violation of the preceding paragraph (b), (three) provides that caused serious accidents, he may not apply "special equipment operator certificate."

Article 31 of the following circumstances, the employer shall be ordered to correct and impose a 1,000 yuan to 30,000 yuan fine:

(A) illegal command special equipment operation;

(Two) operating in violation of the rules of special equipment and safety rules and regulations relating to operation, or in the operating process of discovery potential accidents or other unsafe factors not immediately to site management personnel and units of the responsible person reports, the employer fails to give criticism education or punishment.

Article 32 illegally printed, forged, altered, reselling, leasing, lending, "special equipment operator certificate", or use illegal printing, forged, altered, reselling, leasing, lending, "special equipment operator certificate", at 1,000 yuan fine; constitute a crime, be held criminally responsible.

Article 33 according to the specified procedures for issuing department organization of the examination and audit certification, or examination bodies issuing department did not affect the strict supervision and management of special equipment operator exam quality, higher level certification authority shall order rectification; plot serious, which is responsible for the assessment of special equipment operator working at a higher level organization and implementation of the issuing department.

Article 34 The examination bodies according to the specified program organization examinations, order rectification; serious cases, suspension or revocation of its approval.

Article 35 The issuing department or agency staff examination neglect their duty, abuse of power, it shall be given administrative sanctions; constitutes a crime, be held criminally responsible.

Article 36 Workers not made "special equipment operator certificate" their posts, or the employer did not carry special equipment operator safety education and training, according to "Special Equipment Safety Supervision Regulations" provisions of Article 77 the employer will be punished.

Chapter V Supplementary Provisions

Article 37 "special equipment operator certificate" format, printing and other matters required by the AQSIQ.

Article 38 The examination fee in accordance with relevant regulations.

Article 39 does not apply this approach in housing construction sites and municipal engineering construction site crane operations and related management personnel.

Article 40 These Measures shall be interpreted by the AQSIQ.

Article 41 The present Measures July 1, 2005 shall come into force. Original provisions are inconsistent with the requirements of this approach to the present Measures shall prevail.