This product is a general-purpose cranes, does not apply to explosion, fire hazard or medium humidity and filled with great acids, alkalis gases occasions to work under, does not apply to transport molten metal, toxic and flammable materials in Work.

This product has two operating rooms ground and manipulate forms.  Control room have open, closed two, left or right can be divided into two forms according to the actual requirements of the installation, open the door and the end of two side direction to meet user needs in a variety of different situations to choose.

This product is a general-purpose cranes, does not apply to explosion, fire hazard or medium humidity and filled with great acids, alkalis gases occasions to work under, does not apply to transport molten metal, toxic and flammable materials in Work.

This product has two operating rooms ground and manipulate forms.  Control room have open, closed two, left or right can be divided into two forms according to the actual requirements of the installation, open the door and the end of two side direction to meet user needs in a variety of different situations to choose.

This product is a general-purpose cranes, does not apply to an explosion or fire hazard medium filled with great humidity and acid, alkali gases occasions to work, does not apply to the transport of molten metal, toxic and combustibles in work.

This product has two operational ground and cab forms. Control room have open, closed two kinds, according to the actual requirements are divided into two installation forms the left or right, open the door and the side face two kinds of direction to meet the needs of users in a variety of different situations to choose.

PK-type electric chain hoist is a mature technology series products, the use of safe, high quality, long life, high efficiency, widely used in industrial, commercial, handicraft and service industries and other places, is to improve efficiency, improve working conditions ideal equipment. According to its own principles of design conical rotor brake motors, a common speed, lifting speed fast and precise forms. The spur gear reducer, the second transmission gear is mounted on the friction safety clutch from the chain hoist to withstand extreme overload, high strength wear-resistant steel chain enhance security and stability. Therefore, has a very good safety and reliability.

Flashlight door has direct control and indirect forms of control. Indirect control as safe voltage 36V, flashlight door protection IP65, conical rotor motor protection class is IP54.

PK-type electric chain hoist with various travel agencies, to complete the range of lines and planes transporting material lifting, walking track can be ordinary beam, it can be QZQ standard track.

This product series is compliant with GB/14405-1993 "general overhead crane," a high level of standardization, with the domestic product 1980s levels.

This product is suitable for factories, corporate workshops, warehouses, etc., in the indoor or outdoor fixed cross intercropping general handling and lifting and transport work.

Use this product according to how busy the intermediate and heavy machine into two operating systems; Intermediate for machining, metal structure, assembly plant, heavy duty and continuous smelting workshop for handling work.

The machine consists of box-shaped bridge, traveling mechanism, trolley, electric equipment four parts. All agencies are in the operating room manipulation. Outdoor use, to be with rainproof devices.

Features:

1, the whole by the bridge, trolley traveling mechanism, electronic control equipment, grab five parts.

2, the bridge for the box section welded structure.

3, parts standardization, serialization, universal.

4, hoisting mechanism, operating agencies are used YZR energy-saving motors, supporting new electronic control equipment.

5, all agencies in a coordinated control of the closed control room manipulation.

6, with a detachable power grab, grab, including weight lifting weight.

7, the relevant parts are equipped with security guards, maintenance platform. When used with a rainproof outdoor unit.

Use electromagnets to carry the electromagnetic device called Steel crane. Electromagnetic crane can produce a strong magnetic field strength, dozens of tons of iron, wire, nails, scrap iron and various other materials, without packing no packing strapping do not, you can easily collect and transport, not only operation and effort, and the work simplified. Mounted in a wooden box of steel materials and machinery can be equally handling. Crane work, as long as the current in the electromagnet coil constantly being sucked up heavy objects will not fall, the invisible magnetic force is more reliable than the sturdy chain. If for some reason cut off electricity, it will cause an accident, so some electromagnetic crane is equipped with a steel claw, lift heavy objects to be transported, the sturdy steel claw will automatically fall firmly fastened them. Cranes can not carry hot iron, because the heat of the steel can not be magnetized. Large electromagnetic crane can lift hundreds of tons of heavy objects at once, the figure of the electromagnet diameter of about 1.5 meters, lift 16 tons objects.

February 21, 2008 Administration of Quality Supervision, Inspection and Quarantine promulgated the "Lifting Safety Technology Supervision - bridge crane" Article 66 shall electromagnetic crane lifting electromagnet powered by a dedicated circuit. Electromagnetic crane work due to loss of power, and its lifting objects fall may cause harm, it must be able to guarantee electromagnetic chuck power supply. 

Use electromagnets to carry the electromagnetic device called Steel crane. Electromagnetic crane can produce a strong magnetic field strength, dozens of tons of iron, wire, nails, scrap iron and various other materials, without packing no packing strapping do not, you can easily collect and transport, not only operation and effort, and the work simplified. Mounted in a wooden box of steel materials and machinery can be equally handling. Crane work, as long as the current in the electromagnet coil constantly being sucked up heavy objects will not fall, the invisible magnetic force is more reliable than the sturdy chain. If for some reason cut off electricity, it will cause an accident, so some electromagnetic crane is equipped with a steel claw, lift heavy objects to be transported, the sturdy steel claw will automatically fall firmly fastened them. Cranes can not carry hot iron, because the heat of the steel can not be magnetized. Large electromagnetic crane can lift hundreds of tons of heavy objects at once, the figure of the electromagnet diameter of about 1.5 meters, lift 16 tons objects.

February 21, 2008 Administration of Quality Supervision, Inspection and Quarantine promulgated the "Lifting Safety Technology Supervision - bridge crane" Article 66 shall electromagnetic crane lifting electromagnet powered by a dedicated circuit. Electromagnetic crane work due to loss of power, and its lifting objects fall may cause harm, it must be able to guarantee electromagnetic chuck power supply.

The grab crane extract is an automated apparatus for handling a large number of mainly granular items, and loose soil.

As Grab Loading and unloading process in the driver's direct operating under, so a parallel grab crane, not only can reprint efficiency is greatly improved, and to avoid the heavy manual labor, especially in ports, railway stations, coal plants, warehouses , construction sites and mining, has been widely used.

(1) Compact structure, light weight, small size, easy to use.

(2) unified models, parts versatility, parts interchangeability, repair parts supply convenient.

(3) good sealing reducer, gears, gear shafts are made of high-quality hardened steel heat treated to strengthen the tooth surface, high hardness, good wear resistance, high mechanical efficiency.

(4) using a conical rotor brake motors, brake mechanism to simplify.

(5) The product forms, applicability, and can be widely used for lifting heavy objects and various forms (straight, curved, circular) beam orbit can also be used for single girder, double girder, suspension, spiral arms and light gantry cranes on.

Conditions of use of the product:

(1) Use the power of three-phase alternating current, voltage 380V, frequency 50Hz.

(2) Use of the environment: outdoor, indoor available (outdoor use when installing hoist shelter shed). Hardy (¡Ý -30 ¡æ), high temperature (¡Ü 40 ¡æ).

(3) Job Type: Intermediate JC25% duty and heavy duty JC40% (by weight 30% reduction in use of rated load, as the product design is based on 25% of the basic duty to consider).

(4) an altitude of 1000 meters, fire, explosion, and the media is full of corrosive gases, relative humidity greater than 85% of the cases, is not suitable for use in this product.

(5) Electrical protection grade IP44, insulation class E class.

Extensive use of the product:

(A) for the mechanical repair shop and factory floor workshop, installation of equipment, lifting heavy objects.

(2) for the database and the yard, lifting materials, stacking, stacking.

(3) for the construction and pipeline operations and lifting precast concrete pipe.

(4) for the textile industrial warehouses and hospitals, shops, food factory shop lifting heavy objects.

(5) for the river dock lifting heavy objects.

Model description:

(1) CD1 Type - indicates that only one lifting speed (8m/min) The electric hoist .

(2) MD1 type - indicates two simultaneous lifting speed (8m/min and 0.8m/min) electric hoist.

(3) CD1 electric hoist can be divided into A, B, C, D four types.